Our range of Bosch Security Systems (™) compatible products
Bosch Alarms
WE800EV2
The WE800EV2 receiver is designed to provide a RF arm/disarm interface for the Bosch Solution (™) 2000/3000 range of alarm panels. It will also work with the older 8XX panels. When teamed with our HCT-4P keyfob remote controls the alarm panel can be armed / disarmed in both AWAY and STAY modes.
A Duress / Panic facility is also available from the remote. The receiver also features two ( 2 ) SPDT 1 Amp relays controlled by buttons 3 and 4 on the remote. These relays can be used to open garage doors, gates etc.
This product is ONLY available through Bosch Security Systems distributors.
Bosch Alarms
HCR-BU2
The HCR-BU2 receiver is designed to provide relay outputs which can be operated from any of the DSRF™ transmission type keyfobs supplied by Bosch Security Systems. These keyfobs are The RF-HCT4UL-FOB and the Radion™ Keyfob FB. This receiver removes the need to wire from the control panel to an external device such as a garage door or gate to operate the device.
The HCR-BU2 can be powered from 12 to 24V AC or DC. The product is supplied as a PCB only with no housing. This allows installation into gate motor housings etc. This product is available through your local Bosch Security Systems distributor.
Bosch Alarms
WE800EV2RR
The WE800EV2RR RF Arming Kit is designed to provide a convenient ON/OFF Control for the Solution 2000 / 3000 series of alarm panels and works also with the older 8XX panels. Provision is also made for the control of up to two (2) external devices via on board relays and a third relay with the addition of another receiver.
This RR version ( Remote Receiver ) allows the WE800EV2 to be located up to 50 metres away from the alarm panel. Connection is via a single 4 core 7/020 or 14/020 alarm cable. The WE800EV2RR is sold with the HCT-4W keyfob remote control. This product is only available from Micron Security Products.